Removing The Primary; Removing The Pre-Transfer Charging Assembly - Canon ImageRunner 600 Service Manual

3. Removing the Primary Charging
Assembly
1) Open the front cover.
2) Remove the inside cover (process unit).
3) Disconnect the connector [1]; while shift-
ing the charging assembly fixing plate [2]
to the left, slide out the primary charging
assembly [3].
4. Removing the Pre-Transfer
Charging Assembly
1) Open the front cover.
2) Remove the inside cover (process unit).
3) Disconnect the connector [1]; while shift-
ing the charging assembly fixing plate [2]
to the right, slide out the pre-transfer
charging assembly [3].
COPYRIGHT © 1999 CANON INC.
CHAPTER 6 IMAGE FORMATION SYSTEM
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[1]
[2]
[3]
Figure 6-B707
[1]
[2]
[3]
Figure 6-B708
6-57