Separation Claw Assembly; Separation Claw; Removing The Lower Separation Claw - Canon ImageRunner 600 Service Manual

CHAPTER 8 FIXING SYSTEM
E.

Separation Claw

Assembly
1. Removing the Upper Separation
Claw
1) Slide out the fixing/feeding unit from the
copier.
2) Release the spring [1] used to open the
fixing/delivery assembly; then, detach the
upper separation claw [2].
2. Removing the Lower Separation
Claw
1) Remove the fixing assembly from the
copier.
2) Remove the two screws, and detach the
lower separation claw assembly together
with the support plate.
3) Remove the spring [1] from the lower
separation claw.
4) Remove the three screws [2], and detach
the lower separation claw support plate
[3]; then, detach the separation claw.
8-42
COPYRIGHT © 1999 CANON INC.
[1]
Figure 8-E501
[1]
Figure 8-E502
[2]
[3]
Figure 8-E503
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[2]
[2]