Canon ImageRunner 600 Service Manual page 522

CHAPTER 11 INSTALLATION
2) Connect the connector [3] of the power
supply unit to the connector [4] of the con-
troller as shown.
3) Remove the four screws [6], and detach
the face plate [5] from the copier's rear
cover.
4) Connect the connector J521 [7] of the
copier and the cable of the controller.
11-28
COPYRIGHT © 1999 CANON INC.
[4]
Figure 11-502
[5]
[6]
Figure 11-503
Figure 11-504
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[3]
[7]