Canon ImageRunner 600 Service Manual page 539

Hide thumbs Also See for ImageRunner 600:
Table of Contents

Advertisement

7) Press the switch (SW2) on the controller
to start service mode.
8) Select the appropriate input method:
8.1)Input by keys on the Numeric Keypad-A1
for 'card' or 'ID' (initially, 'card').
8.2)To change from 'card' to 'ID,' perform the
following using the keys on the keypad:
To change 'ID' to 'card,' on the other hand
(requiring the Card Reader-A1), go to 8-
4).
MANAGE-CARD is indicated.
8.3)Press the '2' key, and press the ENT key.
MANAGE-ID is indicated.
8.4)
To change to card input,
When MANAGE-ID is indicated, press
the '1' key, and then press the ENT key.
MANAGE-CARD will be indicated.
COPYRIGHT © 1999 CANON INC.
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 11 INSTALLATION
SW2
LED1
LED2
LED3
SW2
SW3
LED4
LED5
LED6
JC8
JC5
JC6
JC9
CPU
IPC
J5
6
1
6
1
SW1 ON
SW5 ON
Figure 11-C607
Code
Input method
1
2
Table 11-C601
JA1
JB2
JA2
JB1
SW4
Card
ID
11-45

Advertisement

Table of Contents
loading

Table of Contents