Table of Contents
Advertisement
CHAPTER 13 TROUBLESHOOTING
<Step>
1
plug connected to the
2
3
! You may come across such instructions as "Measure the voltage between J109-1 (+) and J109-
2 (-) on the DC controller PCB" when you are asked to check voltage using a meter.
The instructions mean that you are to connect the + or - probe of the meter to its respective
terminal; for example, for J109-1 (+) and J109-2 (-), connect the positive probe to J109-1 and
the negative probe to J109-2.
13-2
COPYRIGHT © 1999 CANON INC.
<Checks>
Is the power
power outlet?
YES
Are the front
door and the covers
closed firmly?
YES
Is the rated
voltage at the power
outlet?
YES
The rest is omitted.
<Yes/No>
<Action>
Connect the
NO
power plug.
Close the front
NO
door and the
covres.
Inform the user
NO
that the problem is
not of the copier.
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
Advertisement
Chapters
Table of Contents
Troubleshooting
