Canon ImageRunner 600 Service Manual page 505

No.
6 Remove the screw, and detach the front
cover of the primary charging assembly.
7 Disconnect the connector and unlock the
primary charging assembly; then take out
the charging assembly.
Clean the primary charging wire and the
grid wire using alcohol.
8 Remove the screw, and detach the front
cover of the pre-transfer charging
assembly.
9 Disconnect the connector; then, unlock
the pre-transfer charging assembly, and
take out the charging assembly.
Clean the pre-transfer charging wire with
alcohol.
COPYRIGHT © 1999 CANON INC.
Work
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 11 INSTALLATION
Remarks
Front cover of the primary charging assembly
Primary charging
Connector
assembly
Unlock
Front cover of the pre-transfer
charging assembly
Connector
Pre-transfer charging assembly
Screw
Screw
Unlock
11-11