Waste Toner Drive Assembly; Removing The Waste Toner Drive Assembly; Multifeeder Pickup Drive Assembly; Removing The Multifeeder Pickup Drive Assembly - Canon iR7086 Series Service Manual

[5] [4]
[4]

10.5.6 Waste Toner Drive Assembly

10.5.6.1 Removing the Waste Toner Drive Assembly

iR7105 / iR7095 / iR7086
Construction
1) Remove the rear cover.
2) Remove the high-voltage PCB unit.
3) Remove the flywheel.
4) Remove the drum gear.
5) Remove the waste toner pipe.
6) Remove the drum drive assembly.
7) Remove the six screws [1], and detach the waste toner drive assembly
[2].
[1]
[1]

10.5.7 Multifeeder Pickup Drive Assembly

10.5.7.1 Removing the Multifeeder Pickup Drive
Assembly
iR7105 / iR7095 / iR7086
Construction
[3]
F-10-31
F-10-32
[2]
[1]
F-10-33
1) Remove the rear cover.
2) Remove the high-voltage PCB unit.
3) Loosen the mounting screw on the rear fixing plate of the registration
roller assembly.
4) Remove the four screws [1], and disconnect the four connectors [2];
then, detach the multifeeder pickup drive assembly [3].
0010-9591
[1]

10.5.8 Lifter Drive Assembly

10.5.8.1 Removing the Lifter Drive Assembly (right deck)

iR7105 / iR7095 / iR7086
Construction
1) Remove the rear cover.
2) Remove the high-voltage PCB unit.
3) Remove the flywheel.
4) Remove the drum gear.
5) Remove the waste toner pipe.
6) Remove the screw, and loosen the harness guide [1]; disconnect the
two connectors [2], and remove the four screws [3]; then, detach the lifter
0010-9593
drive assembly (for the right deck) [4].
F-10-34
[1]
[2] [2] [3]
[2]
[1]
F-10-35
F-10-36
Chapter 10
[1]
[2]
0010-9594
10-15