Stationary Jams - Canon ImageRunner 600 Service Manual

2.

Stationary Jams

a. Common Stationary Jams
Jam check
Sensor N
b. Stationary Jam at Power-On
A stationary jam at power-on is identified in relation to the presence/absence of paper over a
specific sensor about 1 sec after the control panel power switch is turned on.
COPYRIGHT © 1999 CANON INC.
Copy Start key
ON or
PRINT set
INTR
L + 40mm
Normal
(L = paper length)
Figure 7-704 Detecting Stationary Jams
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 7 PICK-UP/FEEDING SYSTEM
A jam check is started after feeding
"paper length + 40 mm" upon detection
of the leading edge of paper.
/ PRINT
L + 40mm
Error
If paper is detected here, a
stationary jam is identified.
7-43