Canon ImageRunner 600 Service Manual page 792

CHAPTER 13 TROUBLESHOOTING
Level 1 Level 2
ADJUST
FEED-
ADJ
CST-ADJ
MISC
Level 1
ADJUST
Level 1
ADJUST
13-206
COPYRIGHT © 2000 CANON INC.
Items under COPIER>ADJUST
Level 3 Range
REGIST -50 to 50
ADJ-REFE -101 to 100
C3-STMTR
C3-A4R
C4-STMTR
C4-A4R
MF-A4R
MF-A6R
MF-A4
C3-LVOL
C3-HVOL
C4-LVOL
C4-HVOL
ATM 0~ 3
Items under FEEDER>ADJUST
Level 3 Range
DOCST -50 to 50
DOCST-M -50 to 50
LA-SPEED -54 to 54
STRD-S -25 to 25
STRD-L -25 to 25
RVM-SPD -30 to 30
Items under SORTER>ADJUST
Level 3 Range
PNCH-HLE
Description
Use it to adjust the activation timing for the registration
clutch.
Use it to adjust the re-pickup horizontal registration.
Use it to adjust the paper width sensor for the cassette 3
(STMTR).
Use it to adjust the paper width sensor for the cassette 3
(A4R).
Use it to adjust the paper width sensor for the cassette 4
(STMTR).
Use it to adjust the paper width sensor for the cassette 4
(A4R).
Use it to adjust the paper width sensor for the manual
feed cassette (A4R).
Use it to adjust the paper width sensor for the manual
feed tray (A6R).
Use it to adjust the paper width sensor for the manual
feed tray (A4).
Use it to set the stacking limit for the cassette 3
(50 sheets).
Use it to set the stacking limit for the cassette 3
(275 sheets).
Use it to se the stacking limit for the cassette 4
(50 sheets).
Use it to set the stacking limit for the cassette 4
(275 sheets).
To set the operating environment for atmospheric pressure.
Description
Use it to adjust the original stop position.
Use it to adjust the original stop position (for manual feed).
Use it to adjust the original feeding speed for stream
reading mode.
Use it to adjust the original stop position for stream
reading mode (for small-size).
Use it to adjust the original stop position for stream
reading mode (for large-size).
Use it to adjust the reversal motor speed.
Description
Use it to adjust the offset of punch holes.
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.