Primary Charging Assembly - Canon ImageRunner 600 Service Manual

CHAPTER 6 IMAGE FORMATION SYSTEM
3. Primary Charging Assembly Cleaning Mechanism
Part 2>Chapter 5>10.1
J502A
1
PRWC-RV
7
PRWC-FV
8
0V
9
PRWC-HP
10
17 Wire
Figure 6-302 Construction of the Construction System
Timing of Cleaning
[1] The surface temperature of the fixing roller is 100˚C or lower when the control panel power switch is
turned on.
[2] The wire cleaning mechanism is turned on in user mode.
[3] At the end of LSTR after making 2000 prints following wire cleaning.
Related Error Code
E060
(wire cleaner HP error)
6-18
COPYRIGHT © 2000 CANON INC.
When '1', the wire cleaner moves toward the rear.
When '1', the wire cleaner moves toward the front.
When the wire cleaner reaches
the home position, '0'.
Wire cleaner
The wire cleaner does not reach the home position within a
specific period of time.
Home position
sensor (MSW4)

Primary charging assembly

CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
Primary charging
wire cleaning
motor (M8)