Canon ImageRunner 600 Service Manual page 477

3) Remove the screw [6] and the stopper
plate [7]; then, slide the compartment [8]
farther out.
4) Remove the right cover. (See p. 10-24.)
5) Remove the screw [9] of the harness
guide, and disconnect the connector [10];
then, remove the three left and right
screws (each) [12], and detach the com-
partment [8] toward the front while lifting
it slightly.
6) Place the compartment [8] on the stack of
copy paper prepared in step 1).
COPYRIGHT © 1999 CANON INC.
(rear left of the
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 10 SIDE PAPER DECK
[7]
compartment)
Figure 10-B306
[9]
[10]
[12]
Figure 10-B307
[6]
[8]
[12]
[11]
[8]
10-29