Canon ImageRunner 600 Service Manual page 541

9) Select the appropriate control mode as fol-
lows:
9.1)Select the appropriate control mode using
the Numeric Keypad-A1.
v
Use / so that FORMAT=1 is indicated.
v
9.2)Select the appropriate control No. to suit
the host copier and the needs of the user
(initially, '1').
9.3)For example, to select '3',
1. FORMAT=1 is indicated. To change
the initial setting '1' to '3',
Press the '3' key.
To clear the input, press the 'c' key for
retry.
To cancel, press the ESC key.
2. When FORMAT=3- is indicated,
press the ESC key.
3. FORMAT=3- is indicated, and the
cursor flashes for a while to indicate
that formatting is taking place. When
the cursor stops to flash, the control
mode is set to '3'.
Caution:
When the control mode has been
changed, the unit price, upper limit,
counter reading, and ID Nos. are initial-
ized, requiring input of the appropriate
settings once again.
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 11 INSTALLATION
11-47