Handling The Laser Assembly - Canon ImageRunner 600 Service Manual

Hide thumbs Also See for ImageRunner 600:

Table of Contents

CHAPTER 1 GENERAL DESCRIPTION

Handling the Laser Assembly

Be sure to take extra care whenever servicing areas around the copier's laser assembly, as by

avoiding the insertion of any tool having a high reflectance.

Be sure also to remove any watches and rings. They can reflect the laser beam to damage your

eyes during work.

The copier's laser beam is a red light. Any covers that may reflect the laser beam bear a copy of

the label shown in Figure 1-603. Exercise particular caution whenever servicing behind such cov-

You will find the label on the copier's laser scanner covers from which laser light can escape.

Figure 1-603-1 Label on the 100/120-V Model

CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.

Laser radiation when open

and interlock defeated.

AVOID DIRECT EXPOSURE

Table of Contents