Canon ImageRunner 600 Service Manual page 512

CHAPTER 11 INSTALLATION
No.
7 Attach cassette size stickers to the
cassettes to suit the user's needs.
8 If you are not installing the finisher,
mount the copy tray.
9 When WAIT has ended, start service
mode.
Control Panel Key Operations
Select 'COPIER'.
#
Select 'FUNCTION'.
#
Select 'INSTALL'.
#
Select 'TONER-S'.
#
Check that the message 'CHECK THE
DEVELOPER' is indicated.
#
Check to make sure that the developing
assembly and the developing assembly
locking plate have been mounted
correctly; then, press the OK key.
#
The copier will start toner supply
operation (about 10 min).
#
When the operation ends, press the
Reset key twice to end service mode.
11-18
COPYRIGHT © 2000 CANON INC.
Work Remarks
Sticker
Starting Service Mode
1. Press the User Mode key.
2. Press '2' and '8' of the keypad at the same time.
3. Press the User Mode key.
Caution:
Do not turn off the power while the machine
is operating.
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.