Canon ImageRunner 600 Service Manual page 41

CHAPTER 1 GENERAL DESCRIPTION
TIMER DATE & TIME SETTING
SETTINGS
AUTO SLEEP TIME
AUTO CLEAR TIME
LOW-POWER MODE TIME
TIME UNTIL UNIT QUIETS
DOWN
DAILY TIMER SETTINGS
ADJUSTMENT/ ZOOM FINE ADJUSTMENT
CLEANING
FEEDER CLEANING
WIRE CLEANING
DOUBLE STAPLE SPACE
ADJUSTMENT
IMAGE MAIL BOX REGISTRATION
SERVER
CUSTOM HD MEMORY ASSIGNMENT
SETTINGS
1-20
COPYRIGHT © 1999 CANON INC.
Use it to set the current date and time.
Use it to set the length of time taken to start sleep mode after opera-
tion/turning off the control panel switch. (10, 15, 20, 30, 40, 50,
60*, 90 min or 2, 3, 4 hr)
Use it to set the length of time taken to bring back the Basic screen
on the touch panel after operation. (0 min; 1* to 9 min)
Use it to set the length of time taken to start low power consumption
mode after operation. (10, 5*, 20, 30, 40, 50, 60, 90 min; 2 to 40 hr)
Use it to set the length of time taken to start silent mode after opera-
tion. (0 min; 1* to 9 min)
Use it to set the day of the week on which the control panel power
switch is turned off. (Sun. to Sat.; 00:00 to 23:59; in 1-min incre-
ments)
Use it to fine-adjust if a discrepancy occurs in size between original
and copy images for vertical and horizontal ratios.
Use it to remove dirt from the pickup roller assembly by moving
copy paper through the ADF.
Use it to clean the wire of the charging assembly.
Use it to adjust the interval of staples (2-point stapling) when the
ADF (accessory) is used. (40 to 150mm; 120mm*)
Use it to set/sort the mailbox settings.
Use it to set the size of the image server. (300 to 1700 MB;
500MB*)
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
*Factory settings.