Removing The Feeding Roller; Orientation Of The Feeding Roller - Canon ImageRunner 600 Service Manual

4.

Removing the Feeding Roller

1) Remove the pickup roller, and remove the
stop ring.
2) Remove the two screws [1], and detach
the manual feed tray guide [2].
3) Remove the stop ring [3] from the front of
the feeding roller assembly, and move the
feeding roller assembly [5] together with
the timing belt [4] to detach.
5.

Orientation of the Feeding Roller

When mounting the feeding roller [6] to
the manual feed tray pickup assembly, be sure
that the belt pulley [7] and the round marking
[8] are toward the copier's front.
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 7 PICK-UP/FEEDING SYSTEM
[1]
Figure 7-A807
[5]
[4]
[3]
Figure 7-A808
[8]
[7]
[6]
Figure 7-A809
[2] [1]
(front of the
copier)
7-47