Canon ImageRunner 600 Service Manual page 496

CHAPTER 11 INSTALLATION
7. The area must have good current of air. If multiple copiers are expected, arrange so that the
exhaust from one copier will not be drawn into another. Further, avoid placing a copier near the
air vent of the room.
In general, the silicone gas* generated by a copier tends to soil corona charging wires, shortening
the wire life. Keep in mind that this is particularly true in a low humidity environment.
*Result of silicone oil evaporating from the fixing assembly.
11-2
COPYRIGHT © 1999 CANON INC.
Exhaust
Wrong 1
Figure 11-101
Wrong 2
Figure 11-102
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.