After Replacing The Hard Disk - Canon ImageRunner 600 Service Manual

CHAPTER 13 TROUBLESHOOTING
4

After Replacing the Hard Disk

1) Take notes in user mode for the following:
• set image server spec>register/set mail box
• set image server spec>set image server size
2) Inform the user that the following will be lost and obtain his/her approval:
• form images in memory
• images in mail box
3) As necessary take notes of the following in service mode (the data will be lost):
• COPIER>DISPLAY>JAM
• COPIER>DISPALY>ERR
• COPIER>COUNTER>JOB>all items
4) Check to make sure that the data lamp on the control panel is off, and turn off the main power
switch.
5) Disconnect the power plug from the power outlet.
Caution:
The machine remains powered as long as the power plug is connected to the power outlet
even after the main switch has been turned off. Be sure to disconnect the power plug from the
power outlet.
6) Replace the hard disk.
7) After mounting, connect the power plug, and turn on the main power switch and the control
power switch.
8) Execute COPIER>FUNCTION>HARD-DISK>FORMAT in service mode.
If the result of execution is OK, end the work.
If the result of execution is NG, execute COPIER>FUNCTION>HRD-DISK>SCANDISK.
If the result is NG once again, replace the hard disk (it is likely to be faulty).
13-44
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.