Canon ImageRunner 600 Service Manual page 523

Hide thumbs Also See for ImageRunner 600:

Table of Contents

5) Secure the controller in place on the

copier's rear cover with four screws [8]

(that come with the unit).

6) Remove the slack from the cable between

the copier and the controller; bundle the

excess length of the cable, and secure it in

place with the harness band [9].

7) Shift SW2-4 [10] of the DIP switch to ON

(so as to select IPC for communication

between controller and copier).

CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.

CHAPTER 11 INSTALLATION

Figure 11-505

Figure 11-506

LED1 LED2 LED3

Figure 11-507

Chapters

Table of Contents