Canon ImageRunner 600 Service Manual page 427

4. Removing the Vertical Path Drive
Assembly
Construction
1) Remove the rear cover.
2) Remove the waste toner case.
3) Remove the two screws [1], and detach
the harness guide [2].
4) Disconnect the connector [3], and remove
the two screws [4]; then, detach the verti-
cal path drive assembly [5].
COPYRIGHT © 1999 CANON INC.
CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[1]
Figure 9-D705
[5] [4]
[4]
Figure 9-D706
[2]
[3]
9-51