Feeding System; Removing The Deck Pickup Unit; Removing The Deck Pickup Roller - Canon ImageRunner 600 Service Manual

D.

Feeding System

1.

Removing the Deck Pickup Unit

1) Remove the upper cover. (See p. 10-25.)
2) Disconnect the two connectors [1], and re-
move the five screws [2].
3) Remove the deck pickup unit [3].
Caution:
When mounting the deck pickup unit
[3], be sure to use the three screws
shown in Figure 10-D302.
2.

Removing the Deck Pickup Roller

1) Remove the deck pickup unit. (See p. 10-
39.)
2) Turn over the deck pickup unit; then, re-
move the resin ring [1] (one each), and de-
tach the deck pickup roller [2].
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 10 SIDE PAPER DECK
[1]
[2]
[2]
Figure 10-D301
Screws
Figure 10-D302
[2]
[1]
Figure 10-D303
[3] [2]
[3]
10-39