Orientation Of The Deck Pickup Roller; Removing The Deck Pickup; Feeding Roller - Canon ImageRunner 600 Service Manual

CHAPTER 10 SIDE PAPER DECK
3. Orientation of the Deck Pickup
Roller
When mounting the deck pickup roller [1]
at the front, be sure that the marking [2] on the
collar (silver) is toward the front and the mark-
ing [3] on the side of the roller is toward the
rear.
When mounting the deck pickup roller [4]
at the rear, be sure that the marking [5] on the
side of the roller and the marking [6] on the
collar (silver) are toward the rear.
4.

Removing the Deck Pickup/

Feeding Roller

1) Remove the deck pickup unit. (See p. 10-
39.)
2) Turn over the deck pickup unit.
3) Remove the resin ring [1], and detach the
deck pickup/feeding roller [2] and the
drive belt [3] toward the front.
10-40
COPYRIGHT © 1999 CANON INC.
(direction
of rotation)
[1] Collar (silver)
Figure 10-D304a
(direction
of rotation)
Collar (gold)
[4]
Figure 10-D304b
[2]
Figure 10-D305
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[3]
[2]
(front)
[5]
[6]
(rear)
[3] [1]