Canon ImageRunner 600 Service Manual page 519

3. Installing the Control Card
1) Secure the control card in place to the con-
trol panel with four screws that come with
the unit.
Caution:
Secure the control card in place so that it
will not come into contact with the con-
trol panel cover when a card is inserted
through the slot.
2) Lead the grounding wire through the wire
saddle, and secure it in place with one
screw (w/ washer) that comes with the
unit.
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 11 INSTALLATION
Screws
Control Card V
Figure 11-409
Screw (w/ washer)
Wire saddle
Grounding wire
Figure 11-410
Screws
11-25