Canon ImageRunner 600 Service Manual page 807

Level 1 Level 2
FUNCTION INSTALL
CCD
LASER
DPC
CST
FIXING
PANEL
PART-
CHK
CLEAR
MISC-R
HRD-
DISK
COPYRIGHT © 2000 CANON INC.
Items under COPIER>FUNCTION
Level 3 Description
TONER-S Use it to supply or stir toner.
CCD-ADJ Use it to execute auto adjustment of shading.
POWER-A Use it to turn on laser A.
POWER-B Use it to turn on laser B.
OFST Use it to adjust the offset for the potential sensor.
C3STMTR Use it to execute auto registration of a paper width basic value for the
cassette 3 (STMTR).
C3-A4R Use it to execute auto registration of a paper width basic value for the
cassette 3 (A4R).
C4-STMTR Use it to execute auto registration of a paper width basic value for the
cassette 4 (STMTR).
C4-A4R Use it to execute auto registration of a paper width basic value for the
cassette 4 (A4R).
MF-A4R Use it to execute auto registration of a paper width basic value for the
manual feed tray (A4R).
MF-A6R Use it to execute auto registration of a paper width basic value for the
manual feed tray (A6R).
MF-A4 Use it to execute auto registration of a paper width basic value for the
manual feed tray (A4).
NIP-CHK Use it to generate a nip width check image output for the fixing roller.
LCD-CHK Use it to check missing dots on the touch panel.
LED-CHK Use it to check the activation of the LEDs on the control panel.
LED-OFF Use it to check the de-activation of the LEDs on the control panel.
KEY-CHK Use it to check the inputs of the keys on the control panel.
TOUCHCHK Use it to adjust the coordinates for the touch panel.
CL Use it to select a clutch that turns on at CL-ON.
CL-ON Use it to check the operation of a clutch.
MTR Use it to check the operation of a motor.
MTR-ON Use it to check the operation of a motor.
SL Use it to select a solenoid that turns on at SL-ON.
SL-ON Use it to check the operation of a solenoid.
ERR Use it to clear error codes.
IP Use it to initialize the RAM on the image processor PCB.
JAM-HIST Use it to clear the jam history.
ERR-HIST Use it to initialize the error code history.
MF-CON Use it to initialize the RAM on the MFC PCB.
PWD-CLR Clears the password of the system administrator
SCANLAMP Use it to check the activation of the scanning lamp.
PRE-EXP Use it to check the activation of the pre-exposure LEDs.
SCANDISK Use it to scan the hard disk.
FORMAT Use it to format the hard disk.
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 13 TROUBLESHOOTING
13-219