Vi . Installing The Copy Data Controller-A1; Setting The Board - Canon ImageRunner 600 Service Manual

CHAPTER 11 INSTALLATION

VI . INSTALLING THE COPY DATA CONTROLLER-A1

A.

Setting the Board

1) Remove the two screws [2], and detach
the cover [1] of the controller.
2) Set the DIP switches SW1 and SW5 on
the controller to suit the needs of the user.
2.1)Set SW1-4 of the DIP switch to suit the
type of the host copier.
2.2)Set SW5-2 DIP switch to suit the appro-
priate paper size if group control is
planned.
To use AB papers (A3, A4, B4, B5), keep
the bit to OFF.
To use Inch papers (11×17, LTR, LGL,
STMT), keep it to ON.
11-36
COPYRIGHT © 1999 CANON INC.
[2]
Figure 11-A601
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[1]
[2]