Removing The Image Leading Edge Sensor - Canon ImageRunner 600 Service Manual

CHAPTER 3 ORIGINAL EXPOSURE SYSTEM
3) Disconnect the connector [4], and detach
the copyboard glass sensor [5].
5. Removing the Image Leading
Edge Sensor
1) Remove the rear cover.
2) Free the harness from the wire saddle [1],
and disconnect the connector [2]; then, re-
move the screw [3], and detach the sensor
mount [4].
3) Disconnect the connector [5], and remove
the screw [6]; then, detach the image lead-
ing edge sensor [7].
3-34
COPYRIGHT © 1999 CANON INC.
[4]
Figure 3-D508
Figure 3-D509
Figure 3-D510
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A
[5]
[4] [3]
[2]
[6]
[5]
[7]
[1]