6.
Adjusting the Height of the Charging Wire
Charging assembly
Primary
Pre-transfer
Transfer
Separation
Reference:
The height of the charging wire for the primary assembly and the transfer charging assembly
may be adjusted by turing the screw found on the back of the assemblies. A single turn of the
screw changes the height by about 0.7mm.
COPYRIGHT © 2000 CANON INC.
CHAPTER 6 IMAGE FORMATION SYSTEM
Height of the charging wire
- 0mm
7.5
+ 3mm
13.6±0.3mm
15.7
±
0.2mm
Figure 6-C714
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
- 0mm
7.5
+ 3mm
No height adjusting
mechanism
6-65