Assembly (For The Left Deck) - Canon ImageRunner 600 Service Manual

8. Removing the Lifter Drive

Assembly (for the left deck)

Construction
1) Remove the rear cover.
2) Open the system box assembly.
3) Remove the DC controller assembly.
4) Disconnect the three connectors [1], and
remove the four screws [2]; then, detach
the lifter drive assembly (for the left deck)
[3].
COPYRIGHT © 1999 CANON INC.
CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[2]
[1]
[2]
[1]
Figure 9-D710
[1]
[3]
[2]
9-55