Show Ripng Interface - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
RIPng Commands

show ripng interface

show ripng interface {detail | vlan <vlan-name> | tunnel <tunnel-name>}
Description
Displays RIPng-specific configuration and statistics for the specified interface.
Syntax Description
detail
vlan-name
tunnel-name
Default
Show summary output for all interfaces.
Usage Guidelines
Displays the RIPng interface configuration and runtime information. If no interface is specified, only the
summary data for all the configured interfaces is displayed. If an interface is specified, only the data for
that interface is displayed in detail. If the keyword
displayed.
Example
The following command displays the RIPng configuration summary for all interfaces:
show ripng interface
The following is sample output from this command:
VLAN IP Address
v1 22cc::3
v2 22bb::1
v3 2abc::1
v4 3ffe::1
Flags: (f) Interface Forwarding Enabled, (i) Interface RIPng Enabled
(n) Multinetted Interface, (r) Router RIPng Enabled
(p) Poison Reverse Enabled, (s) Split Horizon Enabled
(t) Trigerred Update Enabled.
1530
Specifies detailed display.
Specifies an IPv6 configured VLAN.
Specifies an IPv6 tunnel.
detail
Flags Sent
Packets
/64 rif-pst 106349
/64 rif-pst 106349
/120 rif-pst 106351
/64 rif-pst 106349
is specified, detailed data for all interfaces is
Rcvd Triggered Cost
Packets Updates
106349 3 15
106095 3 1
0 4 1
139124 3 1
ExtremeWare XOS 11.5 Command Reference Guide