Extreme Networks ExtremeWare XOS Command Reference Manual page 1107

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
The following display shows output for the command
:
detail
Rule Name: rule-delta
================================================================================
DELTA(counter1) = 0 sampled at 24 seconds ago
Expression evaluation is currently FALSE
if (DELTA(counter1) > 1000) then {
PERMIT: Allow ACL rule acl-rule-3
SYSLOG: [INFO] [Delta $ruleValue counter $counter1 offset $counterOffset1
delTime $deltaTime delay $delayTime]
CLI: [disable port $port]
QOS: Set rule acl-rule-4 qos value to QP6
} else {
DENY: Block ACL rule acl-rule-3
QOS: Set rule acl-rule-4 qos value to QP1
CLI: [enable port $port]
}
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on the BlackDiamond 10808 and BlackDiamond 12804 platforms only.
ExtremeWare XOS 11.5 Command Reference Guide
show clear-flow port 2:6 rule rule-delta
Sample Period: 30
show clear-flow rule
Hysteresis: 20
1107