Show Esrp - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ESRP Commands

show esrp

show esrp {<name>}
Description
Displays ESRP configuration information for one or all ESRP domains on the switch.
Syntax Description
name
Default
Shows summary ESRP information.
Usage Guidelines
This command shows information about the state of an ESRP domain and its neighbors. This includes
information about tracked devices.
In addition to ESRP information, ELRP status information is also displayed. This includes information
about the master and pre-master states, number of transitions to the pre-master state, and the ports
where ELRP is disabled.
The output varies depending upon the configuration and the state of the switch.
Example
The following command displays summary ESRP status information for the ESRP domains on the
switch:
show esrp
The following is sample output from this command:
ESRP:
Configured Version:
# ESRP domain configuration :
--------------------------------------------------------------------------------
Domain Grp Ver VLAN
--------------------------------------------------------------------------------
ed2 0 E
ed2 5 E
ed3 0 E
ed4 0 E
--------------------------------------------------------------------------------
1290
Specifies an ESRP domain name.
Enabled
Extended
VID DId IP/IPX
v2 2 2 2.2.2.3
v2 2 2 2.2.2.3
v3 3 3 0.0.0.0
v4 4 4 0.0.0.0
State Master MAC Address Nbr
Master 00:01:30:f9:9e:90
Aware 00:01:00:0D:9e:8a
Aware 00:01:00:0C:F0:D1
Slave 00:00:00:00:00:00
ExtremeWare XOS 11.5 Command Reference Guide
0
0
0
0