Enable Bgp Export - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
BGP Commands

enable bgp export

enable bgp export [direct | ospf | ospf-extern1 | ospf-extern2 | ospf-inter
| ospf-intra | rip | static] {address-family [ipv4-unicast | ipv4-
multicast]} {export-policy <policy-name>}
Description
Enables BGP to export routes from other protocols to BGP peers.
Syntax Description
direct
ospf
ospf-extern1
ospf-extern2
ospf-inter
ospf-intra
rip
static
address-family
policy-name
Default
Disabled.
If no address family is specified, IPv4 unicast is the default.
Usage Guidelines
The exporting of routes between any two routing protocols is a discreet configuration function. For
example, you must configure the switch to export routes from OSPF to BGP and, if desired, you must
configure the switch to export routes from BGP to OSPF. You must first configure both protocols and
then verify the independent operation of each. Then, you can configure the routes to export from OSPF
to BGP, and the routes to export from BGP to OSPF. Similarly for BGP and ISIS, or BGP and RIP.
You can use a policy to associate BGP attributes including Community, NextHop, MED, Origin, and
Local Preference with the routes. A policy can also be used to filter out exported routes.
Using the
export
configure bgp add network
to BGP only if the route is present in the routing table. The
an individual route from the routing table to BGP. If you use both commands to redistribute routes, the
routes redistributed using the
command.
export
1760
Specifies direct routing.
Specifies OSPF routing.
Specifies OSPF-extern1 routing.
Specifies OSPF-extern2 routing.
Specifies OSPF-inter routing.
Specifies OSPF-intra routing.
Specifies RIP routing.
Specifies static routing.
The address family to which the IGP routes will be exported. BGP supports two
address families: IPv4 Unicast and IPv4 Multicast.
Name of policy to be associated with network export. Policy can filter and/or
change the route parameters.
command to redistribute routes complements the redistribution of routes using the
command. The
command take precedence over routes redistributed using the
network
configure bgp add network
enable bgp export
ExtremeWare XOS 11.5 Command Reference Guide
command adds the route
command redistributes