ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
STP Commands
You can, however, re-use names across multiple categories of switch configuration. For example, you
can use the name Test for an STPD and a VLAN. If you use the same name, Extreme Networks
recommends that you specify the appropriate keyword when configuring the STPD. If you do not
specify the appropriate keyword, the switch displays a message similar to the following:
%% Ambiguous command:
"configure Test"
To view the names of the STPDs on the switch, enter
and press [Tab]. Scroll to the end of the
configure
output to view the names.
Each STPD has its own Root Bridge and active path. After the STPD is created, one or more VLANs can
be assigned to it.
Example
The following example creates an STPD named purple_st:
create stpd purple_st
History
This command was available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1208
ExtremeWare XOS 11.5 Command Reference Guide