Show Bgp Neighbor Flap-Statistics - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

show bgp neighbor flap-statistics

show bgp neighbor <remoteaddr> {address-family [ipv4-unicast | ipv4-
multicast]} flap-statistics {detail}
[all
| as-path <path-expression>
| community [no-advertise | no-export | no-export-subconfed
| number <community_num> | <AS_Num>:<Num>
]
| network [any / <netMaskLen> | <networkPrefixFilter>] {exact}
]
Description
Displays information about neighbor route flap dampening statistics.
Syntax Description
remoteaddr
address-family
flap-statistics
detail
all
no-advertise
no-export
no-export-subconfed
community_num
AS_Num
Num
any
netMaskLen
networkPrefixFilter
exact
Default
If no address family is specified, IPv4 unicast is the default.
Usage Guidelines
Use this command to display information about BGP neighbor route flap dampening.
The option
network any / <netMaskLen>
or greater than
<maskLength>
ExtremeWare XOS 11.5 Command Reference Guide
Specifies an IP address that identifies a BGP neighbor.
The address family. BGP supports two address families: IPv4 Unicast and IPv4
Multicast
Specifies that only flap-statistics should be displayed (for route flap dampening
enabled routes).
Specifies to display the information in detailed format.
Specifies all routes.
Specifies the no-advertise community attribute.
Specifies the no-export community attribute.
Specifies the no-export-subconfed community attribute.
Specifies a community number.
Specifies an autonomous system ID (0-65535).
Specifies the BGP community number.
Specifies all routes with a given or larger mask length.
Specifies a subnet mask length (number of bits).
Specifies an IP address and netmask.
Specifies an exact match with the IP address and subnet mask.
will display all BGP routes whose mask length is equal to
, irrespective of their network address.
show bgp neighbor flap-statistics
1775