Clear Iparp - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

clear iparp

clear iparp {<ip_address> {vr <vr_name>} | vlan <vlan_name>}
Description
Removes dynamic entries in the IP ARP table.
Syntax Description
ip_address
vlan_name
vr_name
Default
If you do not specify a virtual router, the current virtual router context is used.
Usage Guidelines
Permanent IP ARP entries are not affected.
This command is specific to a single virtual router, and it applies to the current virtual router if you do
not specify a virtual router.
Example
The following command removes a dynamically created entry from the IPARP table:
clear iparp 10.1.1.5
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.5 Command Reference Guide
Specifies an IP address.
Specifies a VLAN name.
Specifies a VR name.
clear iparp
1323