Show Pim - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
IP Multicast Commands

show pim

show pim {detail | rp-set {<group_addr>} | vlan <vlan_name>}
Description
Displays the PIM configuration and statistics.
Syntax Description
detail
group_addr
vlan_name
Default
If no VLAN is specified, the configuration is displayed for all PIM interfaces.
If no multicast group is specified for the
Usage Guidelines
The version of this command displays the global statistics for PIM, as well as the details of each
detail
PIM enabled VLAN.
Examples
The following command displays the global PIM configuration and statistics:
show pim
The following is sample output from the command:
PIM Enabled, Version 2
PIM CRP Disabled
BSR state
Current BSR Info
Configured BSR Info : 0.0.0.0 (Priority 0)
CRP Adv Interval
BSR Interval
Cache Timer
Assert Timeout
Generation Id
Threshold for Last Hop Routers: 0 kbps
Threshold for RP
Register-Rate-Limit-Interval
PIM SSM address range
Register Checksum to include data
Active Sparse Ckts 3 Dense Ckts 0
1854
Specifies to display the detailed format.
Specifies an IP multicast group, for which the RP is to be displayed.
Specifies a VLAN name.
rp-set
: ACCEPT_ANY ; BSR Hash Mask Length: 255.255.255.252
: 0.0.0.0 (Priority 0)
: 60 sec ; CRP Holdtime: 150
: 60 sec ; BSR Timeout : 130
: 210 sec ; Prune Timer : 210
: 210 sec ; Register Suppression Timeout,Probe: 60, 5
: 0x42dc282b
: 0 kbps
: Always active
: 232.0.0.0/8
option (Rendezvous Point set), all RPs are displayed.
ExtremeWare XOS 11.5 Command Reference Guide