Disable Pim Ssm Vlan - Extreme Networks ExtremeWare XOS Command Reference Manual

Software version 11.5

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

disable pim ssm vlan

disable pim ssm vlan [<vlan_name> | all]

Disables PIM SSM on an IP interface.

Syntax Description

Disabled on all interfaces.

Usage Guidelines

This command disables PIM-SSM on the specified layer 3 VLAN.

IGMPv3 include messages for multicast addresses in the SSM range will only be processed by PIM if

PIM-SSM is enabled on the interface. Any non-IGMPv3 messages in the SSM range will not be

processed by PIM on any switch interface, whether SSM is enabled or not.

The following command disables PIM-SSM multicast routing on VLAN accounting:

disable pim ssm vlan accounting

This command was first available in ExtremeWare XOS 11.4.

Platform Availability

This command is available on all platforms.

ExtremeWare XOS 11.5 Command Reference Guide

Specifies a VLAN name.

Specifies all VLANs.

disable pim ssm vlan

Extremeware xos 11.5