Unconfigure Mstp Region - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

unconfigure mstp region

unconfigure mstp region
Description
Unconfigures the MSTP region on the switch and returns all MSTP settings to their default values.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
Before you unconfigure an MSTP region, Extreme Networks recommends that you disable all active
STPDs in the region. This includes the CIST and any active MSTIs.
After you issue this command, all of the MSTP settings return to their default values, as described
below:
Region Name—This indicates the name of the MSTP region. In the Extreme Networks
●
implementation, the maximum length of the name is 32 characters and can be a combination of
alphanumeric characters and underscores ( _ ).
Format Selector—This indicates a number to identify the format of MSTP BPDUs. The default is 0.
●
Revision Level—This identifier is reserved for future use; however, the switch uses and displays a
●
default of 3.
Example
The following command unconfigures the MSTP region on the switch:
unconfigure mstp region
History
This command was available in ExtremeWare XOS 11.4.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.5 Command Reference Guide
unconfigure mstp region
1229