ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ESRP Commands
configure esrp add track-ping
configure esrp <esrpDomain> add track-ping <ipaddress> frequency <seconds>
miss <misses>
Description
Configures an ESRP domain to track an external gateway using ping.
Syntax Description
esrpDomain
ipaddress
seconds
misses
Default
No ping tracking.
Usage Guidelines
The tracked-ping metric consists of the total number of stations that are successfully tracked using ping.
ESRP uses an aggregate of tracked pings and traced routes to track an external gateway.
An ESRP domain can track eight stations.
Example
The following command enables ping tracking for the external gateway at 10.207.29.17, pinging every 10
seconds, and considering the gateway to be unreachable if no response is received to 5 consecutive
pings:
configure esrp esrp1 add track-ping 10.207.29.17 frequency 10 miss 5
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
1246
Specifies an ESRP domain name.
Specifies the IP address of the external gateway.
Specifies the interval in seconds between ping requests.
Specifies the number of consecutive ping failures that will initiate failover to
an ESRP slave.
ExtremeWare XOS 11.5 Command Reference Guide