Delete Ospfv3 Area - Extreme Networks ExtremeWare XOS Command Reference Manual

Software version 11.5

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

delete ospfv3 area

delete ospfv3 {domain <domainName>} area [<area-identifier> | all]

Deletes an OSPFv3 area or all OSPFv3 areas.

Syntax Description

area-identifier

Usage Guidelines

An OSPFv3 area cannot be deleted if it has an associated interface. Also, area 0.0.0.0 cannot be deleted.

The following command deletes an OSPFv3 area:

delete ospfv3 area 1.2.3.4

This command was first available in ExtremeWare XOS 11.2.

Platform Availability

This command is available on platforms with a Core or an Advanced Core license.

ExtremeWare XOS 11.5 Command Reference Guide

Specifies an OSPFv3 domain. OSPF-Default is the only one currently

Specifies an OSPFv3 area, a four-byte, dotted decimal number.

Specifies all areas.

delete ospfv3 area

Extremeware xos 11.5