ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
BGP Commands
show bgp routes summary
show bgp routes summary {address-family [ipv4-unicast | ipv4-multicast]}
Description
Displays a summary the BGP route information base (RIB).
Syntax Description
address-family
Default
If no address family is specified, IPv4 unicast is the default.
Usage Guidelines
None.
Example
The following command displays a summary of the BGP route information base (RIB) for IPv4
multicast:
show bgp routes summary address-family ipv4-multicast
History
This command was first available in ExtremeWare XOS 10.1.
This command required an Advanced Core license in ExtremeWare XOS 11.1.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
1782
The address family. BGP supports two address families: IPv4 Unicast and IPv4
Multicast.
ExtremeWare XOS 11.5 Command Reference Guide