Extreme Networks ExtremeWare XOS Command Reference Manual page 1073

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
create netlogin local-user
You must have administrator privileges to use this command. If you do not have administrator
privileges, the switch displays a message similar to the following:
This user does not have permissions for this command.
User names are not case-sensitive; passwords are case-sensitive. User names must have a minimum of 1
character and a maximum of 32 characters. Passwords must have a minimum of 0 characters and a
maximum of 32 characters. If you use RADIUS for authentication, Extreme Networks recommends that
you use the same user name and password for both local authentication and RADIUS authentication.
If you attempt to create a user name with more than 32 characters, the switch displays the following
messages:
%% Invalid name detected at '^' marker.
%% Name cannot exceed 32 characters.
If you attempt to create a password with more than 32 characters, the switch displays the following
message after you re-enter the password:
Password cannot exceed 32 characters
Modifying an Existing Account. To modify an existing local netlogin account, use the following command:
configure netlogin local-user <user-name> {vlan-vsa [[{tagged | untagged}
[<vlan_name>] | <vlan_tag>]] | none]}
Displaying Local Netlogin Accounts. To display a list of local netlogin accounts on the switch, including
VLAN information, use the following command:
show netlogin local-users
Example
The following command creates a local network login user name and password:
create netlogin local-user megtest
After you enter the local netlogin user name, press [Enter]. The switch prompts you to enter a password
(the switch does not display the password):
password:
After you enter the password, press [Enter]. The switch then prompts you to re-enter the password:
Reenter password:
The following command creates a local network login user name, password, and associates a
destination VLAN with this account:
create netlogin local-user accounting vlan-vsa blue
As previously described, the switch prompts you to enter and confirm the password.
1073
ExtremeWare XOS 11.5 Command Reference Guide