Configure Esrp Delete Elrp-Poll Ports - Extreme Networks ExtremeWare XOS Command Reference Manual

Software version 11.5

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

ESRP Commands

configure esrp delete elrp-poll ports

configure esrp <esrpDomain> delete elrp-poll ports [<ports> | all]

Disables ELRP packet transmission on ports of an ESRP domain.

Syntax Description

All ports of an ESRP domain have ELRP transmission enabled.

Usage Guidelines

If you have host ports on an ESRP domain, you do not need to send ELRP packets to those ports.

If you change your network configuration, and a port no longer connects to a master, slave, or ESRP-

aware switch, you can disable ELRP transmission on that port.

The following command disables ELRP packet transmission for slot 2, ports 3-5 on ESRP domain esrp1:

configure vlan esrp1 delete elrp-poll ports 2:3-2:5

This command was first available in ExtremeWare XOS 11.1.

Platform Availability

This command is available on all platforms.

Specifies an ESRP domain name.

Specifies list of slots and ports in the ESRP domain.

Specifies all ports in the ESRP domain.

ExtremeWare XOS 11.5 Command Reference Guide

Extremeware xos 11.5