Extreme Networks ExtremeWare XOS Command Reference Manual page 1932

Software version 11.5
Hide thumbs Also See for ExtremeWare XOS:
Table of Contents

Advertisement

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Configuration and Image Commands
Do you want to save configuration changes to primary.cfg? (y or n)
Enter
to save the configuration and continue with synchronizing the MSMs. Enter
to cancel the
y
n
operation. If you enter
, messages similar to the following appear:
y
Saving configuration on primary MSM ...... done!
Synchronizing configuration to backup MSM .. done!
After the configuration has been saved and replicated to the backup MSM, synchronization begins.
After the initial reboot, if the backup MSM is not available or does not respond within 120 seconds, the
synchronize operation fails.
Use the
command to verify that the backup MSM is in sync with the primary
show switch {detail}
MSM.
BlackDiamond 8800 Series Switch Only. On the BlackDiamond 8800 series switch, the I/O ports on the
backup MSM go down when you synchronize the MSMs. When the primary MSM finishes replicating
its configurations and images to the backup MSM, the I/O ports on the backup MSM come back up.
Example
The following example assumes you have already saved your runtime configuration.
The following command replicates all saved images and configurations from the master MSM to the
backup MSM:
synchronize
After you enter
, status messages similar to the following appear:
synchronize
Synchronize will reboot the backup MSM, then overwrite all code images
and configs with a copy from the master MSM.
Synchronize currently requires Extremeware XOS version 11 or greater on
the backup MSM
DO NOT interrupt synchronize, the backup MSM may become unbootable!
OK to continue? (y/n) Yes
Rebooting Backup MSM...
NOTE: The command line is locked during synchronize
synchronizing...
synchronizing nvram...
synchronizing nvram...
synchronizing nvram...
synchronizing nvram...
synchronizing nvram...
synchronizing nvram...
synchronizing XOS...
[========================================] 100% XOS
Synchronize complete - rebooting backup MSM...
BD-10808.4 #
1932
ExtremeWare XOS 11.5 Command Reference Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware xos 11.5

Table of Contents

Save PDF