Extreme Networks ExtremeWare XOS Command Reference Manual page 1979

Software version 11.5
Hide thumbs Also See for ExtremeWare XOS:
Table of Contents

Advertisement

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
If you try to display diagnostic test information on a slot where no module is installed, the switch
displays messages similar to the following:
No card in slot 3
Or
No card in slot
Running Diagnostics. To run diagnostics on an I/O module or an MSM installed in the BlackDiamond
10808 switch or the BlackDiamond 8800 series switch, use the following command:
run diagnostics
[extended | normal] {slot [<slot> | A | B]}
To run diagnostics on all of the installed I/O modules and the primary MSM installed in the
BlackDiamond 12804 switch, use the following command:
run diagnostics
[extended | normal]
To run diagnostics on the Summit X450 family of switches, use the following command:
run diagnostics
[extended | normal | stack-port]
Depending on the software version running on your switch or your switch model, additional or
different diagnostic information might be displayed. For more information, see the command
on page
1967.
diagnostics
Example
The following command displays the results of module diagnostics for the I/O module in slot 2:
show diagnostics slot 2
The following is sample output from the BlackDiamond 10808 switch:
I/O SLOT
Slotnum 2
DiagResult timestamp Tue Jun 28 10:26:00 2005
Test Temperature = 29 degrees C
Diag Test Version=1.0.6.2.
------------------------------------------------------------------------
CPU System |
Passed
------------------------------------------------------------------------
Register Test |
Passed
------------------------------------------------------------------------
Memory Test |
Passed
------------------------------------------------------------------------
System Test |
Passed
------------------------------------------------------------------------
Summary: Diagnostics Pass
The following is sample output from the BlackDiamond 8800 series switch:
Summary: Diagnostics Pass
ExtremeWare XOS 11.5 Command Reference Guide
S/N=0405F-00063
show diagnostics
run
1979

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware xos 11.5

Table of Contents