Configure Iproute Delete Default - Extreme Networks ExtremeWare XOS Command Reference Manual

Software version 11.5
Hide thumbs Also See for ExtremeWare XOS:
Table of Contents

Advertisement

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
IP Unicast Commands

configure iproute delete default

configure iproute delete default <gateway> {vr <vrname>}
Description
Deletes a default gateway from the routing table.
Syntax Description
gateway
vrname
Default
If you do not specify a virtual router, the current virtual router context is used.
Usage Guidelines
Default routes are used when the router has no other dynamic or static route to the requested
destination. A default gateway must be located on a configured IP interface.
Example
The following command deletes a default gateway:
configure iproute delete default 123.45.67.1
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1346
Specifies a VLAN gateway.
Specifies the virtual router to which the route is deleted.
ExtremeWare XOS 11.5 Command Reference Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware xos 11.5

Table of Contents