Extreme Networks ExtremeWare XOS Command Reference Manual page 1093

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
The following is sample output from this command:
Port: 2:1 Vlan: Default
Authentication: Web-Based, 802.1x
Port State: Unauthenticated
Guest VLAN: Not Enabled
DHCP: Not Enabled
MAC IP address
00:0C:F1:E8:4E:13 0.0.0.0
00:01:30:F3:EA:A0 10.0.0.1
The following command shows the details of the 802.1x mode:
show netlogin dot1x detail
The following is sample output from this command:
NetLogin Authentication Mode : web-based DISABLED;
DISABLED
NetLogin VLAN
NetLogin move-fail-action
------------------------------------------------
802.1x Mode Global Configuration
------------------------------------------------
Quiet Period
Supplicant Response Timeout
Re-authentication period
RADIUS server timeout
EAPOL MPDU version to transmit
Guest VLAN
------------------------------------------------
Port: 1:1, Vlan: Default,
MAC
00:00:86:53:c3:14 : IP=0.0.0.0
: AuthPAE state=AUTHENTICATED BackAuth state=IDLE
: ReAuth time left=3595
: Quiet time left=37
00:02:03:04:04:05 : IP=0.0.0.0
: AuthPAE state=CONNECTING
: ReAuth time left=0
: Quiet time left=37
-----------------------------------------------
For 802.1x, if re-authentication is disabled, the re-authentication period appears as follows:
Re-authentication period
ExtremeWare XOS 11.5 Command Reference Guide
Auth Type
No 802.1x
Yes 802.1x
: "nl"
: Deny
: 30
: 30
: 3600
: 30
: v1
: destVlan
State: Enabled, Authentication: 802.1x
Auth=Yes User= testUser
Auth=No
: 0 (Re-authentication disabled)
ReAuth-Timer User
0 Unknown
0 testUser
802.1x ENABLED; mac-based
ReAuth count=1
User=
BackAuth state=IDLE
ReAuth count=2
show netlogin
1093