Configure Rip Routetimeout - Extreme Networks ExtremeWare XOS Command Reference Manual

Software version 11.5

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

configure rip routetimeout

configure rip routetimeout <seconds>

Configures the route timeout period.

Syntax Description

Specifies a time in seconds.

180 seconds.

Usage Guidelines

If a router does not receive an update message from its neighbor within the route timeout period (180

seconds by default), the router assumes the connection between it and its neighbor is no longer

The following example sets the route timeout period to 120 seconds:

configure rip routetimeout 120

This command was first available in ExtremeWare XOS 10.1.

Platform Availability

This command is available on all platforms.

ExtremeWare XOS 11.5 Command Reference Guide

Extremeware xos 11.5