Run Update - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

run update

run update
run update
Description
Activates a newly installed modular software package.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
After you install a modular software package to the active partition, use this command to make the
update active. This command causes the ExtremeWare XOS system to start the newly installed processes
contained in the package, without rebooting the switch.
If you installed the package to the inactive partition, you need to reboot the switch to activate the
package.
Example
The following command activates any newly installed modular software packages installed on the
active partition:
run update
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
1923
ExtremeWare XOS 11.5 Command Reference Guide