Extreme Networks ExtremeWare XOS Command Reference Manual page 1291

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
# ESRP Port configuration:
--------------------------------------------------------------------------------
Port Weight
--------------------------------------------------------------------------------
6:1 0
6:2 10
6:3 0
The following command displays detailed ESRP status information for the specified ESRP domain on
the switch (the election policy displayed is the default policy in extended mode):
show esrp ed2
The following is sample output from this command:
show esrp ed2
Domain:
Group:
Operational Version:
Vlan Interface:
Vlan Tag:
Domain Id:
Rtif. Admin Status:
Rtif. Virtual Mac :
IP Address:
Election Policy:
standby > sticky > ports > weight > track > priority > mac
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
State:
Active Ports:
Tracked Active Vlan Ports: 0
Tracked IP Routes & Pings: 0
Priority:
Sticky Flag:
MAC:
Active Ports Weight:
Sequence Number:
Hand Shake Flag:
Restart Flag:
Timer Configuration:
PreMaster 4s(0) Neutral 4s(0)
NbrRestart 30s(0)
State Transition Counters: To Master 0 To Neutral 1
To PreMaster 0 To Aware 1
To Slave 1
Last State Change: Mon Apr
ELRP in Premaster:
ELRP in Master:
Tracked Vlans: t_vlan
Tracked Pings: 40.0.1.2 / 3 second intervals / 5 misses allowed
Tracked Ip Routes: 30.4.2.16/255.255.255.0
Tracked Environment: System Power
ExtremeWare XOS 11.5 Command Reference Guide
Host Restart
H
R
ed2
0
extended
v2
2
2
DOWN
00:e0:2b:00:00:80
2.2.2.3
This System
Slave
1
255[255]
0
00:01:30:f9:9e:90
10
8
0
0
Hello 2s(0)
5 10:43:34 2004
Enabled (Interval: 1, Count: 3)
Enabled (Interval: 1)
: OK
Neighbor system
Neighbor 6s(0)
show esrp
1291